How to add IDIS cameras to 3rd party VMS.

Super Admin
07 May 2026
7 views
  1. Download and install IDIS Discovery: https://idisamericas.com/en/productslist/350
  2. Click Lookup > Lookup Devices LAN.
  3. Right click on the camera and select Remote Setup. It will prompt you to set the initial password.
  4. In Remote Setup, click Network > IP Address > Configure a static IP then save it.
  5. Click System > Data/Time > Set the NTP and save it.
  6. If your VMS does not support H.265.
    • Click Video > Streaming. Change the primary and secondary streams to H.264. Click Save and OK when prompted.
  7. Click System > General. Verify ONVIF Protocol is "On" and that ONVIF Event Type is "Normal". Click Save and OK when prompted.
  8. Plug it into the NVR network and add it using ONVIF Conformance.

Was this article helpful?

Bu bilgiler sorununuzu çözmeye yardımcı oldu mu?

Still need help?

Uzman ekibimiz size yardımcı olmak için burada.

New Ticket