Why Does the Recorder Keep Beeping

Super Admin
07 May 2026
6 views
DVR4-4480G, DVR4-4480RN, DVR4-4480V, DVR4-4580G, DVR4-4580RN, DVR4-4580V, DVR4-4680, DVR4-4680RN, DVR4-4685, DVR4-4685RN, DVR4-4780V, DVR4-4980V, DVR4-5580, DVR4-5580G, DVR4-5580RN, DVR4-5680, DVR4-5680RN, DVR8-4480G, DVR8-4480RN, DVR8-4480V, DVR8-4580G, DVR8-4580RN, DVR8-4580V, DVR8-4680, DVR8-4680A, DVR8-4680RN, DVR8-4685, DVR8-4685RN, DVR8-4780V, DVR8-4880RN, DVR8-4980, DVR8-5580, DVR8-5580A, DVR8-5580G, DVR8-5580RN, DVR8-5580RU, DVR8-5680, DVR8-5680A, DVR8-5680RN, DVR8-5680RU, DVR8-5880RU, DVR16-4580G, DVR16-4580RN, DVR16-4580V, DVR16-4680, DVR16-4680A, DVR16-4680RN, DVR16-4680RU, DVR16-4880RU, DVR16-4980, DVR16-5580, DVR16-5580G, DVR16-5580G2, DVR16-5580RU, NVR8-8580, NVR8-8580RN, NVR8-8600RU, NVR8-8780, NVR8-8780RN, NVR16-8580, NVR16-8580RN, NVR16-8600RU, NVR16-8780, NVR16-8780RN, NVW-650, NVW-800, NVW-MR4K, DVR4-4680XN, DVR4-4680XU, DVR4-4685XU, DVR4-5680XN, DVR8-4680X, DVR8-4680XN, DVR8-4680XU, DVR8-4685XU, DVR8-5680X, DVR8-5680XU, NVR8-ADVANX, NVR16-ADVANX

This article applies to recorders that emit a beeping sound whenever there is any of the following:

  1. Motion detection: Buzzer is enabled; check the Alarm detection settings.
  2. No Space on Disk: Overwrite is disabled; check the settings to enable Overwrite.
  3. Disk Error: can be HDD is not detected; may need to format if it is still detected.
  4. Video Loss: camera is not detected or camera is not connected via the recorder's VIDEO IN / channel port.

Check the Alarm Detection settings via Main Menu

  1. Access Menu then go to  Alarm > Detection > Actions > Buzzer.
  2. On each channel, Disable the Buzzer to your desire. If enabled, it triggers to buzzer to alert you. whenever the camera detects movement.
  3.  Click on Save to save the settings.

If there is still beeping, continue below.

Check the Advanced settings via Main Menu

  1.  Access Menu then go to Advanced > Events.
  2. On each Event Type, the Buzzer should be OFF to
    your desire.
  3. Click on Save to save the settings.

Both settings can also send email; therefore, if the issue is similar but via email, check the same settings.

 

If you still hear a long continuous beep even after disabling Buzzer for all settings above, proceed to this article: Swann Recorders Hardware Noises - What does it mean?

 

 

Was this article helpful?

Bu bilgiler sorununuzu çözmeye yardımcı oldu mu?

Still need help?

Uzman ekibimiz size yardımcı olmak için burada.

New Ticket