Updating or Reinstalling TESTER7-IP-3HD Firmware

The procedure for the update is as follows:

1. Remove the micro SD card from the Tester and connect it to a PC using a card reader.
2. Create a folder called "TOOLSUP" in the microSD (it may already exist)
3. Copy the applications "iViewer_v3.5.501.00-000.tlw" and "EZConnect_v1.0.10301.00-000.tlw" into the TOOLSUP folder on the microSD
4. Remove the microSD from the PC and put it in the Tester
5. Go to page 3 of the Tester menu and click on APP TOOL
6. Press Update (bottom left corner)
7. Press Update (upper left corner)
8. Click OK in the pop-up box that asks 'Whether the updated'
9. Click and check the two boxes near "Uninstalled"
10. Press Installation (below)
11. Press OK in the pop-up message that asks for installation
12. Wait a few seconds while the applications are installed
13. Press Close (lower left corner)
14. The installed applications will appear in the "Application tools" folder

Follow the download link for the files mentioned in point 3:

DOWNLOAD