SIP 4.0 - Enable alarm output on an X-SECURITY video door phone screen

To sound a siren or a bell from an X-Security video door phone, we must act from the screen.

In this example we have used a screen with SIP 4.0 firmware

The first thing is to enable the alarm output from the screen.

1 Step - Short press on Settings and then enter the password 123456.

2 Step - Access the submenu ALARM / OUTPUT and then activate the option leaving it ON.

3 Step - Wire the Alarm output from the display to the device, either a Siren or a buzzer. Remember that the contact is dry.

Below is a small example of the connector arrangement, which will depend on the display model; the alarm output may be located at the other end of the housing.