Safire Slave Monitor Configuration

To configure a slave monitor of another one, it can be managed in two ways:

1st Case:

• Add the slave monitor using the wizard, it can be a new installation or added to an existing one:

1. Activate the master monitor with a default password:
2. 
3. The device language is selected:
4. 
5. The network parameters are configured.
6. 
7. The monitor is configured with its address in the house
8. Then, the option "Indoor extension settings" appears if it is enabled the option "Link indoor stations" appears
9. :Which displays all the monitors that are in the network.
10. The device is activated and the IP address is changed to network it with the master device.
11. The slave device will reboot.
12. 
    
13. 
    
14. The desired board is searched and selected:
15. 
16. The device is rebooted and it is already associated.

2nd Case:

• Slave monitor configuration to an existing installation:
• 
  
• Activate the board from Safire Control Center and enter the slave monitor settings menu. Then go to network and in the device configuration, select it as an internal extension.
• 
• 
  
• A different menu will appear, in which the device password and the IP address of the master monitor will be entered.:
•