5. Safire Smart - Basic training - Image settings and recording (2025)

🎥 Step 7: Camera configuration

1. Log in
   Log in via the NVR or directly via the camera's IP address in your browser.
2. Adjust image settings of Event Recording and Schedule Recording
   Go to the Encode Parameters menu:
   • Resolution: Select the desired image quality.
   • Frame rate: Adjust based on your storage capacity.
   • Compression: Set to H.265+.

🎥 Step 8: Recording

1. Set recording schedule
   Go to the Record menu:

   • Select Record mode Auto or Customized.
   • Select the Schedule and Event recording (default: 24/7).

   Auto

Customized

2. Advanced Record settings
   • Set up pre- and post-recording when using event-driven recording.
   • Set the ExpirationTime

📸 Step 9: Snapshot settings in camera

1. Activate snapshot
   • An SD card must be inserted into the camera.
   • Go to Storage --> Snapshot
   • Turn on the schedule and select the type of snapshot (Event Trigger / Timing).
2. Snapshot resolution and interval
   • For Timing Snapshot: set interval to 1 hour (suitable for time-lapse).
   • For Event Trigger: set the interval as short as possible for detailed images.