🛠️ Step-by-Step Installation Guide: Safire Smart Series
📦 Step 1: Preparation and Hardware Check
Make sure you have the following components:
-
NVR: SF-NVR8216A-B2
-
Camera 1: SF-IPT020A-4I1 (Fixed Turret camera)
-
Camera 2: SF-IPB585ZA-4LPR (LPR Bullet camera)
-
Camera 3: SF-IPSD4025ITA-4E1 (PTZ Dome camera)
-
Network cables (Cat5e or higher)
-
PoE switch (if needed)
- Monitor, mouse, and keyboard
-
MicroSD cards (optional for local storage)
🔌 Step 2: Physical Installation
- Mount the cameras at the desired locations (wall or ceiling).
- Connect the cameras via network cables to the PoE ports of the NVR.
- Connect the NVR to a monitor via HDMI or VGA.
- Connect the NVR to the network (router/modem) via the LAN port.
- Add a hard drive to the NVR (if not already installed).