Error: Unable to verify connection status

1. Confirm your Wi-Fi name (SSID) and password
   1. Open your phone’s Wi-Fi settings.
   2. Check the exact spelling of the network name (SSID).
   3. Re-enter your Wi-Fi password in the Swann Security app—carefully check capitalization and spacing.
      
      Why this helps? Even a single incorrect character will prevent the camera from authenticating with your router.
2. If you typed your SSID manually through Advanced Setup, make sure:
   1. The Wi-Fi network is not hidden.
   2. Your Wi-Fi is broadcasting on 2.4 GHz (required for Swann Wi-Fi cameras).
   3. The SSID you entered exactly matches your router name.
      
      Why this helps? Hidden SSIDs and 5 GHz networks can’t be detected by the camera, preventing the app from verifying the connection.

If that didn’t work, try this:

• Restart your router.
• Try connecting your phone to the same Wi-Fi network you’re trying to use for the camera.
• Repeat the setup process in the Swann Security app.

1. Check your SSID and password for special characters – Some special characters can cause your router to send altered information to your device, making the credentials appear invalid.
   Examples of problematic characters:
   < > / \ " ' { } [ ] ; : , ~
   
   Why this helps? Unsupported characters can break the connection process, causing the app to fail during verification.
    
2. Update your router’s SSID or password
   1. Log in to your router’s web interface or mobile app.
   2. Change your Wi-Fi name or password to use:
      • Letters (A–Z, a–z)
      • Numbers (0–9)
      • Supported special characters (see the approved list in the Swann support article)
   3. Save changes and reconnect your phone to the updated network.
   4. Restart the setup process in the Swann Security app.
      
      Why this helps? Using standard characters ensures that your phone, router, and camera all interpret the Wi-Fi credentials correctly.

If that didn’t work, try this:

• Reboot your router after changing the SSID or password.
• Delete the Wi-Fi network from your phone and reconnect to refresh the stored credentials.

Sometimes the app can have difficulty confirming the Wi-Fi connection—even when the credentials are correct.

Tap Continue to proceed

If you are 100% certain the credentials are correct, simply tap Continue in the Swann Security app.

Why this helps? Occasionally, the phone may struggle to test or verify the connection, but the camera can still connect successfully once setup continues.

If that didn’t work, try this:

• Switch your phone’s Wi-Fi off and on
• Close and reopen the Swann Security app
• Restart your Android device
• Attempt the setup again