Annke Vision - Playing Back by System Logs on Annke NVR/DVR

Super Admin
07 May 2026
1 views

Applies to: N48PI/N44PI/N46PI/N44PAM/N48PAW/N48PAW/N46PCK/DT41Y/DT61Y/DT81Y/DN41R/DN61R/DN81R/DT41GB/DT81GB/DT61GB/DT41DB/DT81DB/DT61EQ/DW41JD/DW81KD/DW61LD/DT81DP/
S500/S300/FC200/NCK800/H800/H500

 

Purpose: Playback record file(s) associated with channels after searching system logs.

 

 Before you start: 

  • You should log in to your device.
  • Click Menu > Maintenance > Log Information.

 

Steps:

1. Enter into the Log Information interface. 
Log_information.jpg

2. Click Log Search tab to enter Playback by System Logs
    Set the search Start/End time and Major Type, and click the Search button.System_Log_Search_Interface.jpg
3. Choose a log with a record file and click play_button.jpg button to enter the Playback interface.

Result_of_system_log_search.jpg

 

Note: If there is no record file at the time point of the log, the message box “No result found” will pop up.

 4. On the Playback interface, The toolbar in the bottom part of the interface can be used to control the playing process.                 

         Interface_of_playback_by_log.jpg                                                                                                                                                                           

 

Was this article helpful?

Bu bilgiler sorununuzu çözmeye yardımcı oldu mu?

Still need help?

Uzman ekibimiz size yardımcı olmak için burada.

New Ticket