ANNKE VISION - How to Check The Camera Firmware Version on the NVR

Applies to: N48PAW/N46PCK

Purpose:

This article introduces how to check the camera version on the NVR. You can check the firmware version of the camera to see if there is a new firmware that you can upgrade the camera with.

Before You Start: 

1. Please connect your Network Video Recorder to your monitor by using a HDMI or VGA cable.

You can use a TV or computer as the monitor.

2. Please connect your camera with your video recorder, here is the link for your reference:

ANNKE VISION - Adding ANNKE POE Camera to ANNKE POE NVR (by a direct connection of ethernet cable)

Steps:

Go to the configuration>click expert mode in the left corner>camera>ip camera>please drag the slider to the right. And you can find the firmware of the cameras.