Annke Vision - Check HDD Status on Annke DVR/NVR

Applies to: DT41Y/DT61Y/DT81Y/DN41R/DN61R/DN81R/DT41GB/DT81GB/DT61GB/DT41DB/DT81DB/DT61EQ/DW41JD/DW81KD/DW61LD/DT81DP/N48PI/N44PI/N46PI/N44PAM//N48PAW/N46PCKN88PCH/N441Y/N481Y/S500/S300/FC200/NCK800/H800/H500

Purpose: You may check the status of the installed HDD on DVR/NVR so as to take immediate check and maintenance in case of HDD failure.

There are two ways to check the HDD status: 

• Checking HDD Status in HDD Information Interface
• Checking HDD Status in System Maintenance Interface

Before you start: 

• You have installed an HDD to your DVR/NVR.
• You have logged in to your device.

Checking HDD Status in HDD Information Interface

Steps:

1. Click Menu > HDD >General > HDD information.
   
2. The HDD status will be displayed on the list.

Checking HDD Status in System Maintenance Interface

Steps:

1. Click Menu > Maintenance > System info.
   
   
2. Click the HDD tab to view the status